최신 Avaya-Certification 7003-1 무료샘플문제:
1. A technician has configured a new media gateway by connecting to the serial port for the MGC and entering network information for the card as well as the IP address for the Primary call server. When the MGC reboots, the faceplates displays UNRG. The Call Server console 'IPMG registration denied'.
What should be done to solve this problem?
A) Check to ensure the TLAN cable for the MGC is connected and active
B) Power cycle the MGC card to force it to register
C) Ping from the MGC to the call server over the E-LAN
D) Check to ensure the IPMG has been configured on the call server
2. You are installing a new Communication Server 1000E (CS 1000E) SA release 7x system for your customer. They have asked you to implement the corporate Directory Feature during the installation.
A) The CS 1000E Call Server must be joined to security domain.
B) Centralized authentication must be disabled.
C) Valid telephony accounts must already exist in Subscriber Manager.
D) SFTP must be disabled in LD 117.
3. A customer is commissioning a Communication Server (CS) 1000E 7x system with package 403 (soft switch) and 402 (IPMG). The CPDC Call Server software has been installed successfully, and now the customer is provisioning the Media Gateway Tone and conference loops for the Media Gateway Controller.
Which switch overlay and prompt should the customer use to configure the Media gateway TDS loop?
A) LD 17, VXCT
B) LD 17, SUPT
C) LD 17, XCT
D) LD 17, MGTDS
4. A technician deployed a Communication Server 1000E with dual homing feature configured. Both the T and 2T ports are connected on the media Gateway Controller (MGC) one connection is active to avoid network loops.
Which two statements are true, if the connection to the active port on the MGC is host?
(Choose two)
A) The MGC will switch to the active port after 12 seconds.
B) The MGC and CPPM will have no loss of service.
C) The MGC will switch to the active pert.
D) The MGC will issue a link down error.
5. A customer is installing a new common processor Media Gateway (CPMG) in a Communication Server (CS) 1000E system. They are connected to the backplane serial port 0 of the MGC to access the configuration menu. No IP information exists for the MGC.
How does the customer access the configuration menu for the MGC?
A) The prompt "Press any key to stop auto-boot enter mgcsetup" appears.
B) No action required. The MGC will boot directly into the setup menu.
C) Enter a shell command : <CTRL>0<CTRL>M, provide OAM username and password to access OAM shell.
D) Type "mgcsetup" on the screen.
질문과 대답:
| 질문 # 1 정답: D | 질문 # 2 정답: A | 질문 # 3 정답: C | 질문 # 4 정답: B,C | 질문 # 5 정답: B |
705 개 고객 리뷰
품질과 가치ITCertKR 의 높은 정확도를 보장하는 최고품질의 덤프는 IT인증시험에 대비하여 제작된것으로서 높은 적중율을 자랑하고 있습니다.
테스트 및 승인ITCertKR 의 덤프는 모두 엘리트한 전문가들이 실제시험문제를 분석하여 답을 작성한 만큼 시험문제의 적중률은 아주 높습니다.
쉽게 시험패스ITCertKR의 테스트 엔진을 사용하여 시험을 준비한다는것은 첫 번째 시도에서 인증시험 패스성공을 의미합니다.
주문하기전 체험ITCertKR의 각 제품은 무료 데모를 제공합니다. 구입하기로 결정하기 전에 덤프샘플문제로 덤프품질과 실용성을 검증할수 있습니다.
